specs/a/atlas/atlas-vl.spec

%define enable_native_atlas 0

Name:           atlas
Version:        3.8.4
%if "%{?enable_native_atlas}" != "0"
%define dist .native
%endif
Release:        4%{?_dist_release}
Summary:        Automatically Tuned Linear Algebra Software

Group:          System Environment/Libraries
License:        BSD
URL:            http://math-atlas.sourceforge.net/
Source0:        http://downloads.sourceforge.net/math-atlas/%{name}%{version}.tar.bz2
Source1:        PPRO32.tgz
Source2:        K7323DNow.tgz
Source3:        README.Fedora
Source4:        USII64.tgz                                              
Source5:        USII32.tgz                                              
Source6:        IBMz1032.tgz
Source7:        IBMz1064.tgz
Source8:        IBMz19632.tgz
Source9:        IBMz19664.tgz
Patch0:		atlas-fedora_shared.patch
Patch1:         atlas-s390port.patch
Patch2:		atlas-fedora-arm.patch
BuildRoot:      %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)

BuildRequires:  gcc-gfortran lapack-static

%description
The ATLAS (Automatically Tuned Linear Algebra Software) project is an
ongoing research effort focusing on applying empirical techniques in
order to provide portable performance. At present, it provides C and
Fortran77 interfaces to a portably efficient BLAS implementation, as
well as a few routines from LAPACK.

The performance improvements in ATLAS are obtained largely via
compile-time optimizations and tend to be specific to a given hardware
configuration. In order to package ATLAS for Fedora some compromises
are necessary so that good performance can be obtained on a variety
of hardware. This set of ATLAS binary packages is therefore not
necessarily optimal for any specific hardware configuration.  However,
the source package can be used to compile customized ATLAS packages;
see the documentation for information.

%package devel
Summary:        Development libraries for ATLAS
Group:          Development/Libraries
Requires:       %{name} = %{version}-%{release}
Obsoletes:	%name-header <= %version-%release
Requires(posttrans):	chkconfig
Requires(preun):	chkconfig
Requires(post):		/usr/sbin/alternatives
Requires(postun):	/usr/sbin/alternatives

%description devel
This package contains the libraries and headers for development
with ATLAS (Automatically Tuned Linear Algebra Software).

%define types base

%if "%{?enable_native_atlas}" == "0"
############## Subpackages for architecture extensions #################
#
%ifarch x86_64
%define types base sse3

%package sse3
Summary:        ATLAS libraries for SSE3 extensions
Group:          System Environment/Libraries

%description sse3
This package contains the ATLAS (Automatically Tuned Linear Algebra
Software) libraries compiled with optimizations for the SSE3
extensions to the x86_64 architecture. The base ATLAS builds in Fedora for the
x86_64 architecture are made for the SSE2 extensions.

%package sse3-devel
Summary:        Development libraries for ATLAS with SSE3 extensions
Group:          Development/Libraries
Requires:       %{name}-sse3 = %{version}-%{release}
Obsoletes:	%name-header <= %version-%release
Requires(posttrans):	chkconfig
Requires(preun):	chkconfig
Requires(post):		/usr/sbin/alternatives
Requires(postun):	/usr/sbin/alternatives

%description sse3-devel
This package contains shared and static versions of the ATLAS
(Automatically Tuned Linear Algebra Software) libraries compiled with
optimizations for the SSE3 extensions to the x86_64 architecture.

%endif

%ifarch %{ix86}
%define types base 3dnow sse sse2 sse3

%package 3dnow
Summary:        ATLAS libraries for 3DNow extensions
Group:          System Environment/Libraries

%description 3dnow
This package contains the ATLAS (Automatically Tuned Linear Algebra
Software) libraries compiled with optimizations for the 3DNow extension
to the ix86 architecture. Fedora also produces ATLAS build with SSE, SSE2
and SSE3 extensions.

%package 3dnow-devel
Summary:        Development libraries for ATLAS with 3DNow extensions
Group:          Development/Libraries
Requires:       %{name}-3dnow = %{version}-%{release}
Obsoletes:	%name-header <= %version-%release
Requires(posttrans):	chkconfig
Requires(preun):	chkconfig

%description 3dnow-devel
This package contains headers and shared versions of the ATLAS
(Automatically Tuned Linear Algebra Software) libraries compiled with
optimizations for the 3DNow extensions to the ix86 architecture.

%package sse
Summary:        ATLAS libraries for SSE extensions
Group:          System Environment/Libraries

%description sse
This package contains the ATLAS (Automatically Tuned Linear Algebra
Software) libraries compiled with optimizations for the SSE(1) extensions
to the ix86 architecture. Fedora also produces ATLAS build with SSE2 and SSE3
extensions.

%package sse-devel
Summary:        Development libraries for ATLAS with SSE extensions
Group:          Development/Libraries
Requires:       %{name}-sse = %{version}-%{release}
Obsoletes:	%name-header <= %version-%release
Requires(posttrans):	chkconfig
Requires(preun):	chkconfig

%description sse-devel
This package contains headers and shared versions of the ATLAS
(Automatically Tuned Linear Algebra Software) libraries compiled with
optimizations for the SSE(1) extensions to the ix86 architecture.

%package sse2
Summary:        ATLAS libraries for SSE2 extensions
Group:          System Environment/Libraries

%description sse2
This package contains ATLAS (Automatically Tuned Linear Algebra Software)
shared libraries compiled with optimizations for the SSE2
extensions to the ix86 architecture. Fedora also produces ATLAS build with
SSE(1) and SSE3 extensions.

%package sse2-devel
Summary:        Development libraries for ATLAS with SSE2 extensions
Group:          Development/Libraries
Requires:       %{name}-sse2 = %{version}-%{release}
Obsoletes:	%name-header <= %version-%release
Requires(posttrans):	chkconfig
Requires(preun):	chkconfig

%description sse2-devel
This package contains ATLAS (Automatically Tuned Linear Algebra Software)
shared libraries compiled with optimizations for the SSE2 extensions to the 
ix86 architecture.

%package sse3
Summary:        ATLAS libraries for SSE3 extensions
Group:          System Environment/Libraries

%description sse3
This package contains the ATLAS (Automatically Tuned Linear Algebra
Software) libraries compiled with optimizations for the SSE3.
Fedora also produces ATLAS build with SSE(1) and SSE2 extensions.

%package sse3-devel
Summary:        Development libraries for ATLAS with SSE3 extensions
Group:          Development/Libraries
Requires:       %{name}-sse3 = %{version}-%{release}
Obsoletes:	%name-header <= %version-%release
Requires(posttrans):	chkconfig
Requires(preun):	chkconfig

%description sse3-devel
This package contains ATLAS (Automatically Tuned Linear Algebra Software)
shared libraries compiled with optimizations for the SSE3 extensions to the ix86 architecture.

%endif

%ifarch s390 s390x
%define types base z10 z196

%package z196
Summary:        ATLAS libraries for z196
Group:          System Environment/Libraries

%description z196
This package contains the ATLAS (Automatically Tuned Linear Algebra
Software) libraries compiled with optimizations for the z196.

%package z196-devel
Summary:        Development libraries for ATLAS for z196
Group:          Development/Libraries
Requires:       %{name}-z196 = %{version}-%{release}
Obsoletes:	%name-header <= %version-%release
Requires(posttrans):	chkconfig
Requires(preun):	chkconfig

%description z196-devel
This package contains headers and shared versions of the ATLAS
(Automatically Tuned Linear Algebra Software) libraries compiled with
optimizations for the z196 architecture.

%package z10
Summary:        ATLAS libraries for z10
Group:          System Environment/Libraries

%description z10
This package contains the ATLAS (Automatically Tuned Linear Algebra
Software) libraries compiled with optimizations for the z10.

%package z10-devel
Summary:        Development libraries for ATLAS for z10
Group:          Development/Libraries
Requires:       %{name}-z10 = %{version}-%{release}
Obsoletes:	%name-header <= %version-%release
Requires(posttrans):	chkconfig
Requires(preun):	chkconfig

%description z10-devel
This package contains headers and shared versions of the ATLAS
(Automatically Tuned Linear Algebra Software) libraries compiled with
optimizations for the z10 architecture.

%endif
%endif

%global mode %{__isa_bits}
%ifarch %{arm}
%define arch_option -A 38
%define threads_option -t 2
%global mode ' '
%endif

%prep
%setup -q -n ATLAS
%patch0 -p0 -b .shared
%ifarch s390 s390x
%patch1 -p1 -b .s390
%endif
%ifarch %{arm}
%patch2 -p0 -b .arm
%endif
cp %{SOURCE1} CONFIG/ARCHS/
cp %{SOURCE2} CONFIG/ARCHS/
cp %{SOURCE3} doc
cp %{SOURCE4} CONFIG/ARCHS/
cp %{SOURCE5} CONFIG/ARCHS/
cp %{SOURCE6} CONFIG/ARCHS/
cp %{SOURCE7} CONFIG/ARCHS/
cp %{SOURCE8} CONFIG/ARCHS/
cp %{SOURCE9} CONFIG/ARCHS/

%build
for type in %{types}; do
	if [ "$type" = "base" ]; then
		libname=atlas
		%define pr_base %(echo $((%{__isa_bits}+0)))
	else
		libname=atlas-${type}
	fi
	mkdir -p %{_arch}_${type}
	pushd %{_arch}_${type}
	../configure -b %{mode} %{?threads_option} %{?arch_option} -D c -DWALL -Fa alg '-g -Wa,--noexecstack -fPIC'\
	--prefix=%{buildroot}%{_prefix}			\
	--incdir=%{buildroot}%{_includedir}		\
	--libdir=%{buildroot}%{_libdir}/${libname}	\
	--with-netlib-lapack=%{_libdir}/liblapack_pic.a

%if "%{?enable_native_atlas}" == "0"
%ifarch x86_64
	if [ "$type" = "base" ]; then
		sed -i 's#ARCH =.*#ARCH = HAMMER64SSE2#' Make.inc
		sed -i 's#-DATL_SSE3##' Make.inc 
		sed -i 's#-msse3#-msse2#' Make.inc 
	elif [ "$type" = "sse3" ]; then
		sed -i 's#ARCH =.*#ARCH = HAMMER64SSE3#' Make.inc
		%define pr_sse3 %(echo $((%{__isa_bits}+4)))
	fi
%endif

%ifarch %{ix86}
	if [ "$type" = "base" ]; then
		sed -i 's#ARCH =.*#ARCH = PPRO32#' Make.inc
		sed -i 's#-DATL_SSE3 -DATL_SSE2 -DATL_SSE1##' Make.inc 
		sed -i 's#-mfpmath=sse -msse3#-mfpmath=387#' Make.inc 
	elif [ "$type" = "3dnow" ]; then
		sed -i 's#ARCH =.*#ARCH = K7323DNow#' Make.inc
		sed -i 's#-DATL_SSE3 -DATL_SSE2 -DATL_SSE1##' Make.inc 
		sed -i 's#-mfpmath=sse -msse3#-mfpmath=387#' Make.inc 
		%define pr_3dnow %(echo $((%{__isa_bits}+1)))
	elif [ "$type" = "sse" ]; then
		sed -i 's#ARCH =.*#ARCH = PIII32SSE1#' Make.inc
		sed -i 's#-DATL_SSE3 -DATL_SSE2##' Make.inc 
		sed -i 's#-msse3#-msse#' Make.inc 
		%define pr_sse %(echo $((%{__isa_bits}+2)))
	elif [ "$type" = "sse2" ]; then
		sed -i 's#ARCH =.*#ARCH = P432SSE2#' Make.inc
		sed -i 's#-DATL_SSE3##' Make.inc 
		sed -i 's#-msse3#-msse2#' Make.inc 
		%define pr_sse2 %(echo $((%{__isa_bits}+3)))
	elif [ "$type" = "sse3" ]; then
		sed -i 's#ARCH =.*#ARCH = P4E32SSE3#' Make.inc
		%define pr_sse3 %(echo $((%{__isa_bits}+4)))
	fi
%endif

%ifarch s390 s390x
# we require a z9/z10/z196 but base,z10 and z196
# we also need a compiler with -march=z196 support
# the base support will use z196 tuning
	if [ "$type" = "base" ]; then
		%ifarch s390x 
			sed -i 's#ARCH =.*#ARCH = IBMz19664#' Make.inc
                %endif
		%ifarch s390 
			sed -i 's#ARCH =.*#ARCH = IBMz19632#' Make.inc
                %endif
		sed -i 's#-march=z196#-march=z9-109 -mtune=z196#' Make.inc
		sed -i 's#-march=z10 -mtune=z196#-march=z9-109 -mtune=z196#' Make.inc
		sed -i 's#-march=z10#-march=z9-109 -mtune=z10#' Make.inc
		sed -i 's#-DATL_ARCH_IBMz196#-DATL_ARCH_IBMz9#' Make.inc
		sed -i 's#-DATL_ARCH_IBMz10#-DATL_ARCH_IBMz9#' Make.inc
		sed -i 's#-DATL_ARCH_IBMz9#-DATL_ARCH_IBMz9#' Make.inc
	elif [ "$type" = "z10" ]; then
		%ifarch s390x 
			sed -i 's#ARCH =.*#ARCH = IBMz1064#' Make.inc
                %endif
		%ifarch s390 
			sed -i 's#ARCH =.*#ARCH = IBMz1032#' Make.inc
                %endif
		sed -i 's#-march=z196#-march=z10#' Make.inc
		sed -i 's#-march=z10 -mtune=z196#-march=z10#' Make.inc
		sed -i 's#-march=z9-109#-march=z10#' Make.inc
		sed -i 's#-DATL_ARCH_IBMz196#-DATL_ARCH_IBMz10#' Make.inc
		sed -i 's#-DATL_ARCH_IBMz9#-DATL_ARCH_IBMz10#' Make.inc
		%define pr_z10 %(echo $((%{__isa_bits}+1)))
	elif [ "$type" = "z196" ]; then
		%ifarch s390x 
			sed -i 's#ARCH =.*#ARCH = IBMz19664#' Make.inc
                %endif
		%ifarch s390 
			sed -i 's#ARCH =.*#ARCH = IBMz19632#' Make.inc
                %endif
		sed -i 's#-march=z196#-march=z10 -mtune=z196#' Make.inc
		sed -i 's#-march=z10#-march=z10 -mtune=z196#' Make.inc
		sed -i 's#-march=z9-109#-march=z10 -mtune=z196#' Make.inc
		sed -i 's#-DATL_ARCH_IBMz10#-DATL_ARCH_IBMz196#' Make.inc
		sed -i 's#-DATL_ARCH_IBMz9#-DATL_ARCH_IBMz196#' Make.inc
		%define pr_z196 %(echo $((%{__isa_bits}+2)))
	fi
%endif

%endif
	make build
	cd lib
	make shared
	make ptshared
	popd
done

%install
rm -rf %{buildroot}
for type in %{types}; do
	pushd %{_arch}_${type}
	make DESTDIR=%{buildroot} install
        mv %{buildroot}%{_includedir}/atlas %{buildroot}%{_includedir}/atlas-%{_arch}-${type}
	if [ "$type" = "base" ]; then
		cp -pr lib/*.so* %{buildroot}%{_libdir}/atlas/
		rm -f %{buildroot}%{_libdir}/atlas/*.a
	else
		cp -pr lib/*.so* %{buildroot}%{_libdir}/atlas-${type}/
		rm -f %{buildroot}%{_libdir}/atlas-${type}/*.a
	fi
	popd

	mkdir -p %{buildroot}/etc/ld.so.conf.d
	if [ "$type" = "base" ]; then
		echo "%{_libdir}/atlas"		\
		> %{buildroot}/etc/ld.so.conf.d/atlas-%{_arch}.conf
	else
		echo "%{_libdir}/atlas-${type}"	\
		> %{buildroot}/etc/ld.so.conf.d/atlas-%{_arch}-${type}.conf
	fi
done
mkdir -p %{buildroot}%{_includedir}/atlas


%clean
rm -rf %{buildroot}

%post -p /sbin/ldconfig

%postun -p /sbin/ldconfig

%posttrans devel
if [ $1 -eq 0 ] ; then
/usr/sbin/alternatives	--install %{_includedir}/atlas atlas-inc 	\
		%{_includedir}/atlas-%{_arch}-base %{pr_base}
fi

%preun devel
if [ $1 -ge 0 ] ; then
/usr/sbin/alternatives --remove atlas-inc %{_includedir}/atlas-%{_arch}-base
fi

%if "%{?enable_native_atlas}" == "0"
%ifarch x86_64

%post -n atlas-sse3 -p /sbin/ldconfig

%postun -n atlas-sse3 -p /sbin/ldconfig

%posttrans sse3-devel
if [ $1 -eq 0 ] ; then
/usr/sbin/alternatives	--install %{_includedir}/atlas atlas-inc 	\
		%{_includedir}/atlas-%{_arch}-sse3  %{pr_sse3}
fi

%preun sse3-devel
if [ $1 -ge 0 ] ; then
/usr/sbin/alternatives --remove atlas-inc %{_includedir}/atlas-%{_arch}-sse3
fi

%endif

%ifarch %{ix86}
%post -n atlas-3dnow -p /sbin/ldconfig

%postun -n atlas-3dnow -p /sbin/ldconfig

%posttrans 3dnow-devel
if [ $1 -eq 0 ] ; then
/usr/sbin/alternatives	--install %{_includedir}/atlas atlas-inc 	\
		%{_includedir}/atlas-%{_arch}-3dnow  %{pr_3dnow}
fi

%preun 3dnow-devel
if [ $1 -ge 0 ] ; then
/usr/sbin/alternatives --remove atlas-inc %{_includedir}/atlas-%{_arch}-3dnow
fi

%post -n atlas-sse -p /sbin/ldconfig

%postun -n atlas-sse -p /sbin/ldconfig

%posttrans sse-devel
if [ $1 -eq 0 ] ; then
/usr/sbin/alternatives	--install %{_includedir}/atlas atlas-inc 	\
		%{_includedir}/atlas-%{_arch}-sse  %{pr_sse}
fi

%preun sse-devel
if [ $1 -ge 0 ] ; then
/usr/sbin/alternatives --remove atlas-inc %{_includedir}/atlas-%{_arch}-sse
fi

%post -n atlas-sse2 -p /sbin/ldconfig

%postun -n atlas-sse2 -p /sbin/ldconfig

%posttrans sse2-devel
if [ $1 -eq 0 ] ; then
/usr/sbin/alternatives	--install %{_includedir}/atlas atlas-inc 	\
		%{_includedir}/atlas-%{_arch}-sse2  %{pr_sse2}
fi

%preun sse2-devel
if [ $1 -ge 0 ] ; then
/usr/sbin/alternatives --remove atlas-inc %{_includedir}/atlas-%{_arch}-sse2
fi

%post -n atlas-sse3 -p /sbin/ldconfig

%postun -n atlas-sse3 -p /sbin/ldconfig

%posttrans sse3-devel
if [ $1 -eq 0 ] ; then
/usr/sbin/alternatives	--install %{_includedir}/atlas atlas-inc 	\
		%{_includedir}/atlas-%{_arch}-sse3  %{pr_sse3}
fi

%preun sse3-devel
if [ $1 -ge 0 ] ; then
/usr/sbin/alternatives --remove atlas-inc %{_includedir}/atlas-%{_arch}-sse3
fi

%endif

%ifarch s390 s390x
%post -n atlas-z10 -p /sbin/ldconfig

%postun -n atlas-z10 -p /sbin/ldconfig

%posttrans z10-devel
if [ $1 -eq 0 ] ; then
/usr/sbin/alternatives	--install %{_includedir}/atlas atlas-inc 	\
		%{_includedir}/atlas-%{_arch}-z10  %{pr_z10}
fi

%preun z10-devel
if [ $1 -ge 0 ] ; then
/usr/sbin/alternatives --remove atlas-inc %{_includedir}/atlas-%{_arch}-z10
fi

%post -n atlas-z196 -p /sbin/ldconfig

%postun -n atlas-z196 -p /sbin/ldconfig

%posttrans z196-devel
if [ $1 -eq 0 ] ; then
/usr/sbin/alternatives	--install %{_includedir}/atlas atlas-inc 	\
		%{_includedir}/atlas-%{_arch}-z196  %{pr_z196}
fi

%preun z196-devel
if [ $1 -ge 0 ] ; then
/usr/sbin/alternatives --remove atlas-inc %{_includedir}/atlas-%{_arch}-z196
fi

%endif

%endif

%files
%defattr(-,root,root,-)
%doc doc/README.Fedora
%dir %{_libdir}/atlas
%{_libdir}/atlas/*.so.*
%config(noreplace) /etc/ld.so.conf.d/atlas-%{_arch}.conf

%files devel
%defattr(-,root,root,-)
%doc doc
%{_libdir}/atlas/*.so
%{_includedir}/atlas-%{_arch}-base/
%{_includedir}/*.h
%ghost %{_includedir}/atlas

%if "%{?enable_native_atlas}" == "0"

%ifarch x86_64

%files sse3
%defattr(-,root,root,-)
%doc doc/README.Fedora
%dir %{_libdir}/atlas-sse3
%{_libdir}/atlas-sse3/*.so.*
%config(noreplace) /etc/ld.so.conf.d/atlas-%{_arch}-sse3.conf

%files sse3-devel
%defattr(-,root,root,-)
%doc doc
%{_libdir}/atlas-sse3/*.so
%{_includedir}/atlas-%{_arch}-sse3/
%{_includedir}/*.h
%ghost %{_includedir}/atlas

%endif

%ifarch %{ix86}

%files 3dnow
%defattr(-,root,root,-)
%doc doc/README.Fedora
%dir %{_libdir}/atlas-3dnow
%{_libdir}/atlas-3dnow/*.so.*
%config(noreplace) /etc/ld.so.conf.d/atlas-%{_arch}-3dnow.conf

%files 3dnow-devel
%defattr(-,root,root,-)
%doc doc
%{_libdir}/atlas-3dnow/*.so
%{_includedir}/atlas-%{_arch}-3dnow/
%{_includedir}/*.h
%ghost %{_includedir}/atlas

%files sse
%defattr(-,root,root,-)
%doc doc/README.Fedora
%dir %{_libdir}/atlas-sse
%{_libdir}/atlas-sse/*.so.*
%config(noreplace) /etc/ld.so.conf.d/atlas-%{_arch}-sse.conf

%files sse-devel
%defattr(-,root,root,-)
%doc doc
%{_libdir}/atlas-sse/*.so
%{_includedir}/atlas-%{_arch}-sse/
%{_includedir}/*.h
%ghost %{_includedir}/atlas

%files sse2
%defattr(-,root,root,-)
%doc doc/README.Fedora
%dir %{_libdir}/atlas-sse2
%{_libdir}/atlas-sse2/*.so.*
%config(noreplace) /etc/ld.so.conf.d/atlas-%{_arch}-sse2.conf

%files sse2-devel
%defattr(-,root,root,-)
%doc doc
%{_libdir}/atlas-sse2/*.so
%{_includedir}/atlas-%{_arch}-sse2/
%{_includedir}/*.h
%ghost %{_includedir}/atlas

%files sse3
%defattr(-,root,root,-)
%doc doc/README.Fedora
%dir %{_libdir}/atlas-sse3
%{_libdir}/atlas-sse3/*.so.*
%config(noreplace) /etc/ld.so.conf.d/atlas-%{_arch}-sse3.conf

%files sse3-devel
%defattr(-,root,root,-)
%doc doc
%{_libdir}/atlas-sse3/*.so
%{_includedir}/atlas-%{_arch}-sse3/
%{_includedir}/*.h
%ghost %{_includedir}/atlas

%endif

%ifarch s390 s390x
%files z10
%defattr(-,root,root,-)
%doc doc/README.Fedora
%dir %{_libdir}/atlas-z10
%{_libdir}/atlas-z10/*.so.*
%config(noreplace) /etc/ld.so.conf.d/atlas-%{_arch}-z10.conf

%files z10-devel
%defattr(-,root,root,-)
%doc doc
%{_libdir}/atlas-z10/*.so
%{_includedir}/atlas-%{_arch}-z10/
%{_includedir}/*.h
%ghost %{_includedir}/atlas

%files z196
%defattr(-,root,root,-)
%doc doc/README.Fedora
%dir %{_libdir}/atlas-z196
%{_libdir}/atlas-z196/*.so.*
%config(noreplace) /etc/ld.so.conf.d/atlas-%{_arch}-z196.conf

%files z196-devel
%defattr(-,root,root,-)
%doc doc
%{_libdir}/atlas-z196/*.so
%{_includedir}/atlas-%{_arch}-z196/
%{_includedir}/*.h
%ghost %{_includedir}/atlas
%endif
%endif

%changelog
* Thu Mar 15 2012 NAKAMURA Kenta <kenta@vinelinux.org> - 3.8.4-4
- initial build for Vine Linux

* Thu Sep 01 2011 Deji Akingunola <dakingun@gmail.com> - 3.8.4-3
- Apply patch to enable arm build (Patch provided by Jitesh Shah <jiteshs@marvell.com>)
- Stop turning off throttle checking, upstream frown at it (seems O.K. for Koji)

* Mon Jun 20 2011 Dan Horák <dan[at]danny.cz> - 3.8.4-2
- Use -march=z10 for z196 optimised build because the builder is a z10
  (Christian Bornträger)

* Tue Jun 14 2011 Deji Akingunola <dakingun@gmail.com> - 3.8.4-1
- Update to 3.8.4
- Build the default package for SSE2 and add a SSE3 subpackage on x86_64
- Apply patch (and arch defs.) to build on s390 and s390x (Dan Horák)
- Fix-up build on s390 and s390x (Christian Bornträger)

* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org>
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild

* Mon Jul 26 2010 Deji Akingunola <dakingun@gmail.com> - 3.8.3-18
- Create a subpackage for SSE2 on x86_64

* Sat Jul 17 2010 Dan Horák <dan[at]danny.cz> - 3.8.3-17
- rebuild against fixed lapack libraries

* Thu Jul 15 2010 Dan Horák <dan[at]danny.cz> - 3.8.3-16
- fix build on s390 (patch by Karsten Hopp)

* Wed Feb 10 2010 Deji Akingunola <dakingun@gmail.com> - 3.8.3-15
- Disable the problematic sparc patch
- Change lapack-devel BR to lapack-static, where liblapack_pic.a now resides.

* Wed Feb 03 2010 Dennis Gilmore <dennis@ausil.us> - 3.8.3-14
- fix sparc build

* Fri Jan 29 2010 Deji Akingunola <dakingun@gmail.com> - 3.8.3-13
- Remove static libraries.
- Fix typo in SSE3 subpackage's summary.

* Sat Oct 24 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-12
- Use alternatives to workaround multilib conflicts (BZ#508565). 

* Tue Sep 29 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-11
- Obsolete the -header subpackage properly. 

* Sat Sep 26 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-10
- Use the new arch. default for Pentium PRO (Fedora bug #510498)
- (Re-)Introduce 3dNow subpackage

* Sun Sep  6 2009 Alex Lancaster <alexlan[AT]fedoraproject org> - 3.8.3-9
- Rebuild against fixed lapack (see #520518)

* Wed Aug 13 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-8
- Revert the last change, it doesn't solve the problem. 

* Tue Aug 04 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-7
- Create a -header subpackage to avoid multilib conflicts (BZ#508565). 

* Tue Aug 04 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-6
- Add '-g' to build flag to allow proper genration of debuginfo subpackages (Fedora bug #509813)
- Build for F12

* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.8.3-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

* Sat May 02 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-4
- Use the right -msse* option for the -sse* subpackages (Fedora bug #498715)

* Tue Apr 21 2009 Karsten Hopp <karsten@redhat.com> 3.8.3-3.1
- add s390x to 64 bit archs

* Fri Feb 27 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-3
- Rebuild

* Mon Feb 23 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.8.3-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild

* Sun Feb 22 2009 Deji Akingunola <dakingun@gmail.com> - 3.8.3-1
- Update to version 3.8.3

* Sun Dec 21 2008 Deji Akingunola <dakingun@gmail.com> - 3.8.2-5
- Link in appropriate libs when creating shared libs, reported by Orcan 'oget' Ogetbil (BZ#475411)

* Tue Dec 16 2008 Deji Akingunola <dakingun@gmail.com> - 3.8.2-4
- Don't symlink the atlas libdir on i386, cause upgrade issue (BZ#476787)
- Fix options passed to gcc when making shared libs

* Tue Dec 16 2008 Deji Akingunola <dakingun@gmail.com> - 3.8.2-3
- Use 'gcc -shared' to build shared libs instead of stock 'ld'

* Sat Dec 13 2008 Deji Akingunola <dakingun@gmail.com> - 3.8.2-2
- Properly obsolete/provide older subpackages that are no longer packaged.

* Mon Sep 01 2008 Deji Akingunola <dakingun@gmail.com> - 3.8.2-1
- Upgrade to ver 3.8.2 with refined build procedures.

* Thu Feb 28 2008 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-15
- Disable altivec package--it is causing illegal instructions during build.

* Thu Feb 28 2008 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-14
- Enable compilation on alpha (bug 426086).
- Patch for compilation on ia64 (bug 432744).

* Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 3.6.0-13
- Autorebuild for GCC 4.3

* Mon Jun  4 2007 Orion Poplawski <orion@cora.nwra.com> 3.6.0-12
- Rebuild for ppc64

* Fri Sep  8 2006 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-11
- Rebuild for FC6.
- Remove outdated comments from spec file.

* Mon Feb 13 2006 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-10
- Rebuild for Fedora Extras 5.
- Add --noexecstack to compilation of assembly kernels. These were
  previously marked executable, which caused problems with selinux.

* Mon Dec 19 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-9
- Rebuild for gcc 4.1.

* Mon Oct 10 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-8
- Make all devel subpackages depend on their non-devel counterparts.
- Add /etc/ld.so.conf.d files for -sse and -3dnow, because they don't
  seem to get picked up automatically.

* Wed Oct 05 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-7
- Forgot to add the new patch to sources.

* Tue Oct 04 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-6
- Use new Debian patch, and enable shared libs (they previously failed
  to build on gcc 4).
- Minor updates to description and README.Fedora file.
- Fix buildroot name to match FE preferred form.
- Fixes for custom optimized builds.
- Add dist tag.

* Wed Sep 28 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-5
- fix files lists.

* Mon Sep 26 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-4
- generate library symlinks earlier for the benefit of later linking steps.

* Wed Sep 14 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-3
- Change lapack dependency to lapack-devel, and use lapack_pic.a for
  building liblapack.so.

* Wed Sep 14 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-2
- Add "bit" macro to correctly build on x86_64.

* Tue Aug 16 2005 Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-1
- Initial version.